Re: TR-3 Radiator Removal NO!!!!

["T. R. Householder" <trhouse@greenapple.com>]

If It's worth doing ......It's worth doing right......

But  in this case ... It just "Don't" come out.....

T.R.

Fred Thomas wrote:
> 
> Tom, I guess that means the nose has to come-off, correct. <g> Biggest
> short-cut I know of, is do it right the first time.  "FT"
> ----- Original Message -----
> From: T. R. Householder <trhouse@greenapple.com>
> To: Bill Brewer <bbrewer@lightspeed.net>
> Cc: <triumphs@autox.team.net>
> Sent: Wednesday, February 02, 2000 2:00 AM
> Subject: Re: TR-3 Radiator Removal
> 
> >
> > I REPEAT!!!!!!!!!!!
> >
> >
> >
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> > NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO NO
> >
> >
> > WE ARE PREREVING THE MARQUE NOT HACKING IT UP!!!!!
> >
> > THANKS FOR LISTENING.
> >
> > Bill Brewer wrote:
> > >
> > >      Is it possible to get the radiator out of a TR-3A without removing
> the
> > > front cowl? Anyone done this job recently?
> > >      I am going to recore the radiator without a crank hole and install
> an
> > > oil cooler.
> > >
> > >      Bill Brewer
> > >      Tehachapi, CA
> > >      1960 TR-3A TS 72747 LO - Driver, getting floors & interior
> > >      1961 TR-3A TS 75407 L  - Lots of pieces.
> > Bill Brewer wrote:
> > >
> > >      Is it possible to get the radiator out of a TR-3A without removing
> the
> > > front cowl? Anyone done this job recently?
> > >      I am going to recore the radiator without a crank hole and install
> an
> > > oil cooler.
> > >
> > >      Bill Brewer
> > >      Tehachapi, CA
> > >      1960 TR-3A TS 72747 LO - Driver, getting floors & interior
> > >      1961 TR-3A TS 75407 L  - Lots of pieces.