Note my post of a few minutes ago. My dash is original.
On Tue, 15 Feb 2000, Dennis Lambert wrote:
>
> Upon closer examination of my dash, I think Ed is entirely correct. The
> material covering the dash is not vinyl, but some sort of thin molded-on
> plastic, with no clips. It's chipping off a little around the glove box,
> but otherwise it's on there pretty good. Does anyone have a late TR3-A with
> an original dash that can verify the covering material? This plastic is
> grained like vinyl, looks like vinyl on the surface, but if you look closely
> at the edges of the dash, it's apparent it is much thinner than vinyl.
> thanks, Dennis
>
> -----Original Message-----
> From: fogbro1 [mailto:fogbro1@bellatlantic.net]
> Sent: Monday, February 14, 2000 7:34 PM
> To: Jim Bauder
> Cc: Musson, Carl; TR List
> Subject: Re: FW: TR-3A dash recovering and metal clips
>
>
>
> Didn't the later TR3's have a molded covering, not requiring the metal
> clips? Don't know how you'd remove it since it wasn't glued on.
>
> Ed Woods
>
James A. Ruffner
|