| To: | TR <triumphs@autox.team.net> |
|---|---|
| Subject: | Re: TR3 radiator hose? |
| From: | Geo Hahn <geohahn@azstarnet.com> |
| Date: | Wed, 24 May 2000 12:12:59 -0700 |
| References: | <A16B7C633ED6D111B56B0060B06852695F53A5@mail-cal.oao.com> <392C12D5.25C46768@earthlink.net> |
Randall wrote: > It appears to be 1.5" nominal, although the fitting are slightly > smaller, roughly 1.4" . Andy - FWIW, if you're looking for an over-the-counter flex hose replacement for either the intermediate or lower hoses (not the short one to top of the rad) 1½ x 10½ will work. Not as nice as the molded, but what I carry as a spare. As Randall noted, there is no substitute for the top hose except as an emrgency replacement to get you home. Geo Hahn 59 TR3A Tucson, AZ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Rimmer Bros Signal Red Spray Cans, JOHNEDWARDALLEN |
|---|---|
| Next by Date: | Re: Rimmer Bros Signal Red Spray Cans, Joe Curry |
| Previous by Thread: | Re: TR3 radiator hose?, Randall |
| Next by Thread: | '66 Spitfire in Austin, TX area, Neil Penberthy |
| Indexes: | [Date] [Thread] [Top] [All Lists] |