Ah, come one, Mitch. It wouldn't be any fun if you didn't do it three times.
(I know from experience). Jerry Oliver, Olympia, WA
----- Original Message -----
From: <MS6453@aol.com>
To: <triumphs@autox.team.net>
Sent: Friday, May 26, 2000 4:58 PM
Subject: DRIVE SHAFT DIRECTION
>
> Hi all,
>
> I removed the drive shaft on my 74 TR6 and just want to make sure the
> reinstallation is correct. Bentley describes the position to be the solid
> tube to the front & the splined narrower end to the rear, but that's not
the
> position it was in when I removed it. Don't feel like doing this repair
> enough times to get good at it so I want to get it right the first time.
> Thanks, Mitch
>
|