Ahhh. It's not often we get to see a DPO in the making :-) I did
the same thing to the lower screws which connect the windscreen
frame to the stantions. None of the screws the big three sell were
long enough to reach the corner brackets. I made my one screws by
reforming the heads on some long 10-32 stainless flat head screws.
Drew
On Jul 13, 6:53pm, David Moag wrote:
> Subject: RE: TR3 Rearview Mirror Mounting -- SOLVED
>
> Ed,
>
> Ooops --- well after running the tap through them a few times they're 10-32
> now!
>
> - Dave
>
>
> >-----Original Message-----
> >From: fogbro1 [mailto:fogbro1@bellatlantic.net]
> >Sent: Thursday, July 13, 2000 6:00 PM
> >To: David Moag
> >Cc: Triumphs Mailing List
> >Subject: Re: TR3 Rearview Mirror Mounting -- SOLVED
> >
> >
> >Dave,
> >
> >It's not 10-32, but close. It's 2BA, British Association. Anything under
> >1/4" on the TR3 is BA AFAIK.
> >
> >Ed
> >
>
>-- End of excerpt from David Moag
--
Drew Rogge
drew@pixar.com
|