Pat,
I'm assuming that you need the chrome lever switch with the attached plastic
cam. I have one available. Hopefully you have the small wheel that fits in
the cam, otherwise you will have to hold the lever to engage the signal. I
know because I ended up making one good horn/signal assembly out of two
because of the missing wheel.
Good luck on reassembly, you will need 2 pairs of hands the size of
Thimballina's to hold all of the springs in place. Assemble in a very clean
area without a lot of places for parts to hide, so that you can find the
springs after you launch them across the room several times. You will be
amazed at how many other parts you will find when looking for those springs.
Send me your address and I will send you the lever, no charge. Just buy me a
tall one if we ever meet.
Gary Bouffard
59 TR3A TS58399
|