Message text written by "Musson, Carl"
>If you drive the trans from the output shaft (driveshaft end), you MUST
run
the drill counterclockwise. Damage to the OD will occur if you try to
engage it running the other way. <
Carl, if you are driving it with a drill you will stall out the drill long
before you damage the sprag clutch. They are not that fragile. Don't run
it bacwards with the engine, tho...
Dave Massey.
///
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
///
|