triumphs
[Top] [All Lists]

Re: TR6 auxiliary hood (bonnet) release

To: "Will" <tr6@mac.com>, <triumphs@autox.team.net>
Subject: Re: TR6 auxiliary hood (bonnet) release
From: "Martin Secrest" <msecrest@erols.com>
Date: Tue, 2 Oct 2001 15:04:06 -0400
References: <p04320400b7df401af2da@[62.253.84.89]>
Yes, this elegant solution was devised by Capital Triumph club member Joe
Cannon for his '71 TR6.  I put it in my car too.  It works like a dream --
the biggest mental hurdle is drilling the small hole in the bulkhead for the
activating lever, which can also be made from an old piece of a wiper blade
...

===
Martin Secrest
73 GT6 (driver)
72 TR6 (weekender)
Arlington, VA

"She's got a carburetor tied to the moon."






> A couple of week-ends ago an eight month old throttle cable broke on
> my car. Frustrating, but I was within walking distance of the TR Shop
> in Chiswick; with so few TR outlets around it seemed I was actually
> lucky. But,the late model PI cable was the only one they were out of
> stock of....ended up coming home on a flatbed.
>
> However, I finally got round to making up & fitting an auxiliary
> bonnet release as per this link:
> http://www.clark.net/pub/rweeks/hood_release.html
>
> So simple, so effective. No problem to avoid the steering column on a
> RHD car either, using the remains of a broken cable release....How
> did Triumph miss such a simple solution?
> --
> William Davies
> 1975 TR6 PI
> CR6157-O

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>