Thanks!
----- Original Message -----
From: "Randall Young" <ryoung@NAVCOMTECH.COM>
To: "Triumph List" <triumphs@autox.team.net>
Sent: Thursday, October 11, 2001 6:51 PM
Subject: RE: TR4 Hub Removal
> Kurtis :
>
> It's a 10-32 screw about an inch long (head is unimportant, round head is
> fine).
> But, I've never been able to get it to work, usually wind up grabbing the
> dust cap with pliers. Fortunately, it doesn't show, and replacements are
> cheap.
>
> Randall
>
> > According to my Bentley workshop Manual, I need a No. 10 U.N.F. setscrew
> > (supplied with the tool kit) to remove the grease retaining cap.
> > Needless to
> > say, I don't have the original factor tool kit, and I'm not
> > familiar with the
> > terminology used to describe the setscrew. What size/thread
> > screw do I need
> > for this?
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|