Jack, Martin,
Apple Hydraulics (800-882-7753) sells a rebuild kit for their overbored
MCs.
$22.50. I need one too.
NFI.
Rick
1973 TR6 CF257OU
> Subject: Re: TR6 master cylinder rebuild
>
> Jack:
>
> Yes, the O-rings seal against the wall. You're probably installing a standard
> rebuild kit into an overbored (rebuilt) cylinder. There may be a tag on the
> bottom indicating the cylinder is overbored.
>
> Get the oversize kit if you can, but you probably won't find it in stock
> anywhere. (Funny, that ...) In which case, you'll have to buy the rebuilt
>M/C,
> something you were trying to avoid.
>
> - --
> Martin Secrest
> 72 TR6
> 73 GT6
>
> "Jack W. Drews" wrote:
>
> > I'm installing a rebuild kit in my TR6 master cylinder.
> >
> > Question: The secondary piston, the one that goes into the innermost
> > bore, the one with the smaller diameter, has a rubber ring on it. Is the
> > rubber ring supposed to seal against the cylinder wall?
> ------------------------------
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|