triumphs
[Top] [All Lists]

RE: TR6 Wiper Motor Removal

To: "6 Pack List \(E-mail\)" <6pack@autox.team.net>, "Triumph Mailing List \(E-mail\)" <triumphs@autox.team.net>
Subject: RE: TR6 Wiper Motor Removal
From: "Jon" <triumph@bigolbear.com>
Date: Sat, 9 Mar 2002 09:38:54 -0500
Yup- flip it over, remover the flat bottom cover plate, remove the circlip
and thrust washer from the drive gear shaft and lift out the connecting rod.

-----Original Message-----
From: owner-triumphs@autox.team.net
[mailto:owner-triumphs@autox.team.net]On Behalf Of Hugh Fader
Sent: Saturday, March 09, 2002 8:58 AM
To: 6 Pack List (E-mail); Triumph Mailing List (E-mail)
Subject: TR6 Wiper Motor Removal


Hello. I'm pulling some of the parts out of the engine bay so I can clean
things up and re-paint. I'm having trouble figuring out how to remove the
wiper motor. I left my Bentley manual with the machine shop and the Haynes
is not much help on this. What's the easiest way to un-hook the cable going
to the wipers? I see this can be done from inside the motor housing by
removing the connecting rod. Is this the only way?

Thanks,
Hugh

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>