triumphs
[Top] [All Lists]

TR3a clutch fork on shaft

To: a Wallace <wallaces@superaje.com>
Subject: TR3a clutch fork on shaft
From: Dave Massey <105671.471@compuserve.com>
Date: Sun, 17 Mar 2002 18:56:24 -0500
Cc: "[unknown]" <triumphs@autox.team.net>
Message text written by a Wallace
>Thanks to the several folks who responded to this question. I did get the 
fork off by drilling in from the opposite side, and then using a punch, so 
no sawing of shaft was required. For some reason I thought I didn't have 
access to the right spot to do this but once the front piece is off the 
input shaft to the transmission it's no sweat.
Thanks again,
<

I only wish this had occured to me before I sawed min off many years ago.

Dave

///  triumphs@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe triumphs
///
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>