I used the two part epoxy "HiTemp" paint from eastwood, it takes
several coats but there is enough in the kit to do the front
calipers and the rear drums, I think it looks great, it is hard as
glass and just as smooth...just be sure and carefully follow the
directions.
oh...yea...I used "Gloss RED"...as previously stated....Yeee Haaa...
At 8:50 PM -0500 1/5/03, James McCracken wrote:
>Had a friend that used "caliper paint" that had to be baked on. we sand
>blasted, cleaned, painted, baked, and it still came off. If anyone has had
>good luck, let me know.
>
--
Bill Pugh
1957 TR3
aka
Casper
Wallace, CA
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|