Hi everyone,
Does anybody out there happen to know the size/thread of the nuts welded
to the inside of the rear inner fenders that the seat belt body bolts
into. I had to cut/grind the bolt and nut off both sides when
disassembling my car and need to provide new nuts to the body shop to
have them welded on.
The bottom of the B-post seat belt attachment point is 7/16" UNF, is the
fender well nut the same size?
Rob
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|