>No fluid is showing up at the wheel cylinder.
>
>What am I missing?
Hi Steve,
Hopefully you've gotten past your problem, but in case you haven't there is
something you are missing.
You need to bench bleed new and rebuilt master cylinders before you install
them. This is normally accomplished with a short brake line that attaches to
the master cylinder and bends back into the top of the cylinder. You
normally do this with the master cylinder clamped in a vise before putting
it into the car. Hope this helps.
John Matthews
'61 Herald
'63 TR 4
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|