> McMaster-CArr does not appear to have screws this small either. Their
> selections begin at a #6.
Try under pan-head instead of round-head. For example, P/N 92470A097 is a
#2 pan-head Phillips, 3/8" long, in 8-18 SS. $2.74 for a box of 100.
As an alternative, you might consider using a machine screw. If memory
serves, you can get to the back of that area fairly easily with the heater
out, and that would let you use a brass screw in whatever size suits you.
Randall
/// triumphs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|