Yeah, easy...... Now try doing it with the A post actually in the car.
I ended up using large pop rivets. 3 months later and still holding.
-jimb
http://home.centurytel.net/~jimbar
Dave Massey wrote:
>Jeff, these rivets are more traditional than the new-fangled "Pop Rivets
>(R)" that are commonplce today. These require a tool (a pointed center
>punch may work well enough) to flair out the hollow section to retain it in
>place. You will need to hold a hammer against the head with one hand,
>take your punch in another hand and with another hammer in your third hand
>strike the punch to flair it out.
>
>Simple. Makes one wonder why we all converted to pop rivets.
>
>Good luck
>
>Dave
|