triumphs
[Top] [All Lists]

RE: 1976 TR6 Ignition switch Moss # 667-875

To: "Robert J. Greene" <rgreene@whoi.edu>, triumphs@autox.team.net, 6pack@autox.team.net
Subject: RE: 1976 TR6 Ignition switch Moss # 667-875
Date: Tue, 24 Aug 2004 22:20:16 -0500
Cc: triumphs@autox.team.net
Robert:

The ignition switch is held in by one (but possible two) very, very small set 
screws. If you have the new one in hand, look along the side of it and you'll 
find two small holes, 180 degrees apart. These are the holes that the small set 
screws fit in. To replace or reattach the switch, remove the speedometer and 
use the opening to access and remove the screw on the side of the barrel or to 
re-set it. You'll need a small Phillips head screwdriver. Once you remove the 
speedometer, you'll see it.

Ted Schumacher helped me with this same project just about a month ago.

Hope this helps.

Bob
'75 TR6

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8




<Prev in Thread] Current Thread [Next in Thread>