triumphs
[Top] [All Lists]

RE: brake/clutch master cylinders

To: <Triumphs@Autox.Team.Net>
Subject: RE: brake/clutch master cylinders
Date: Sun, 17 Oct 2004 19:24:45 -0700
> I have a few brake/clutch master cylinders that are stamped
> Girling and have
> the numbers 310680.  They have one pipe connector at 90 degrees
> and the other
> pipe connection at about a 45 degree angle.  This design seems to
> be the shape
> of the current Moss and TRF master cylinders.
>
> I have a few Girling clutch/brake master cylinders that are
> stamped with the
> number 310660 and one also has the name Dialoy on the back of it.  These
> cylinders have both pipe connectors at 90 degrees to the cylinder.
>
> I have not been able to find these Girling part numbers on the
> Internet and I
> checked with the big guys and they don't use these Girling
> numbers.   I see
> that there are Girling replacements with different numbers now so I expect
> that the numbering system was changed during the last 42 years.
>
> If anyone knows the history of these Girling cylinder numbers and if they
> could confirm which of the two types would have been used on the
> TR3B I would
> appreciate the information.

Doug, I don't know whence the straight exits, but I do know your TR3B should
definitely have the angled exits.

Randall

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8




<Prev in Thread] Current Thread [Next in Thread>