triumphs
[Top] [All Lists]

Re: TR3A/TR4A exhaust systems interchangagbility

To: TeriAnn Wakeman <twakeman@cruzers.com>, Triumph Triumph list <triumphs@Autox.Team.Net>
Subject: Re: TR3A/TR4A exhaust systems interchangagbility
From: Bill & Skip Pugh <anabil@caltel.com>
Date: Thu, 11 Nov 2004 11:12:47 -0800
References: <F1C2BD22-33EE-11D9-865D-0003939B2F7E@cruzers.com>
TeriAnn,  is right  on, I did almost the same thing to Casper, except 
I used a Monza resonator, and a good glass pack.   TeriAnn ... we 
will have to have an exhaust purr contest sometime ... <G>

>>I think the TR3A manifold would bolt up to the to the head of the 
>>4A but what exhaust system would you then use?
>
>You guys are so silly. Bolt the header on, go to your local muffler 
>shop and say the muffler goes here and the pipe gets routed through 
>these holes here & here.
>
>I'm running four tube headers with collector behind the starter 
>motor, stock TR3A muffler and a straight pipe going to the back 
>without a resonator (like the TR2).  A sweeter purring TR I've never 
>heard.


-- 
Bill  Pugh
1957 TR3
aka
Casper
Wallace, CA




<Prev in Thread] Current Thread [Next in Thread>