Thanks John,
I think you've found the problem. Even though my car is a '73, it
apparently had ( and needs ) the cable for a '74+.
The PO made extensive "modifications". There's another $45 down the
tube. Live and learn!
Thanks again,
--
Dale VanCleef
'73 TR6 - CF985U
---SCCA - 337056
John Mitchell wrote:
> Dale, thers an early model choke cable and a late model. Late model
> were solid wire. Check which you ordered. John Mitchell 76 TR6
>
> Dale VanCleef wrote:
>
>> List,
>> I recently purchased a choke cable from TRF. While installing it, I
>> noticed that the cables are made of twisted strands of wire. The old
>> one had solid wires. Stranded wire cables cannot "push" very well.
>> Consequently, I can apply the choke... but I cannot release it (shut
>> it off.).
>> So:
>> 1) Is there supposed to be some sort of spring return on the choke?
>> 2) Am I missing something obvious?
>> 3) Is the $45 cable just wrong?
>>
>> Thanks in Advance,
|