triumphs
[Top] [All Lists]

Dust boots and caliper pistons

To: 6-Pack <6pack@autox.team.net>,
Subject: Dust boots and caliper pistons
From: Don Malling <dmallin@attglobal.net>
Date: Sun, 10 Jul 2005 12:10:41 -0400
List,

I'm having a heck of a time installing new dust boots and caliper pistons on my 
TR250 16P calipers. 
Is there a trick to this? Seems impossible to put the dust boot on after the 
piston is in the 
caliper. But putting the dust boot on first and then putting the caliper in 
seems close to 
impossible too.

These are the early 16P calipers. The dust boot attaches to the caliper in a 
groove just at the top 
of the cylinder in the caliper. The later 16PB has a male flange sort of thing 
that extends above 
the caliper's cylinder, and the dust boot attaches to that. Seems much easier 
than these early 16P 
calipers.

Must be a trick to it.

Don Malling




<Prev in Thread] Current Thread [Next in Thread>