RE: TR6 Brakes - Bleed Problem

["Randall" <tr3driver@comcast.net>]

> This TR6 has new break lines, rebuilt Servo, rebuilt P.D.W.A. and new rubber
> in the Master Cylinder.  In attempting to bleed the brakes, I get fluid to
> the front but no fluid to the rear.  Anyone ever had this problem or have an
> idea what the problem might be.

Did you bench bleed the MC ?  If not, I'd guess the rear brake portion of the MC
is dry.  Try bleeding the fitting right at the MC, that usually works.

Randall