triumphs
[Top] [All Lists]

Re: Poly Trailing Arm Bushings

To: Richard Seaton <rsh17@msn.com>
Subject: Re: Poly Trailing Arm Bushings
Date: Sun, 05 Mar 2006 11:58:43 -0500
Cc: 6pack@autox.team.net, triumphs@autox.team.net
References: <BAY104-F23155C8652CD786D3C38FFAAE80@phx.gbl>
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.7.2) Gecko/20040804 Netscape/7.2 (ax)
Thanks Richard,  I'll grease em all over:)   John

Richard Seaton wrote:

> John, grease the urethane bushings any place where metal touches the 
> bushing inside and outside, and use anti seize inside the distance 
> pieces where the bolts go.
>
>
>
> Richard Seaton
> RSH17@msn.com
> View My 1969 TR6 restoration @ 
> (http://groups.msn.com/Richards69TR6Restoration)
> OR
> http://www.triumphowners.com/registry.cgi?sectionID=111014&vehicleID=92
>
>
>
>
> ----Original Message Follows----
> From: John Mitchell <jmitch@snet.net>
> Reply-To: John Mitchell <jmitch@snet.net>
> To: 6 Pack <6pack@autox.team.net>,        "triumphs@autox.team.net"  
> <triumphs@autox.team.net>
> Subject: Poly Trailing Arm Bushings
> Date: Sun, 05 Mar 2006 09:30:20 -0500
>
>     I'm installing polyurethane trailing arm bushings and was 
> wondering what I'm supposed to grease.  Is it the outside of the 
> bushing where it goes through the trailing arm, or the bolt and metal 
> tube going through the bushing.  Thanks for any help.  John Mitchell  
> 76 TR6
>
> Your messages not reaching the list?
> Check out http://www.team.net/posting.html


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org


===  unsubscribe/change address requests to majordomo@autox.team.net

<Prev in Thread] Current Thread [Next in Thread>