> I am taking the timing cover off, so I need to remove the fan hub
> extension. I have removed the 4-blade fan and undone the 6 bolts
> from the extension to the main pulley/crank. The pulley is
> moving loosely, but the extension is solid. Before I apply too
> much "assistance" with a hammer and soft drift, have I missed anything?
Sounds like you missed the big bolt with the handcrank dog as it's head.
With that out of the way, the extension and pulley halves should fall off.
Randall
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|