[TR] Trying to hook up a gear drive starter

["jim hearn" <jimhearn1@comcast.net>]

My good friend has a '75 or '76 TR6 and he is trying to hook up one of the
gear drive starters with the single spade terminal on the solenoid.  His
previous stock starter had two spade terminals and screw on terminal going
to the solenoid.  How is this rewired for the aftermarket gear drive
starter?  In both cases, I am not mentioning the main lead from the battery
since there is no problem there.  Thanks for any help.

[demime 1.01d removed an attachment of type application/ms-tnef which had a 
name of winmail.dat]


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org