Installing rear interior pieces - rear and side cappings, wheel arch vinyl,
rear seat back, etc. and need some input regarding the sequence. I have
looked on both web and in books, and am striking out - many pictures, for
example in Piggott, have the nice convertible top cover in place, hiding
exactly what I need to see.
If someone could direct me to some pictures that would be ideal.
What I need to know specifically are two things:
1. Does the very rear capping that goes across the top of the seat back, go
over or under the next two capping pieces, which go around the corner?
2. Do the vertical fuzzy seals at the rear of the door opening simply get
clamped between the hardboard piece and the body metal, and, how far down do
they go i.e. what happens where they interface with the carpet?
Thanks,
Jim Wallace
TS81417LO
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|