triumphs
[Top] [All Lists]

Re: [TR] odd tr4 restoring prob

To: allenhess@mgcarclub.com, triumphs@autox.team.net
Subject: Re: [TR] odd tr4 restoring prob
From: CarlSereda@aol.com
Date: Mon, 30 Jul 2007 14:39:21 EDT
Thanks Allen,
Sounds just like mine. Can you tell me if your brackets on your original TR4
valance are EXACTLY like mine in this attached photo? Please note how close
the bracket is to the edge of valance - and too closely positioned over the
wiring hole in valance.. same as your's? (I put a green dot where
bracket-screw/slot needs to go to line up with my grill). Otherwise grill fits 
perfectly and
is in fact all bolted in for this photo!
Regards,
Carl
--------------------
Just looked at my original front valence (CT13678) and the parking
light bracket is in the 12 o'clock position, pointing down, so that
the speed nut on the bracket lines up with the top hole/slot in the
grill.

Allen
**************************************
 Get a sneak peek of the all-new
AOL at http://discover.aol.com/memed/aolcom30tour

[demime 1.01d removed an attachment of type application/octet-stream which had 
a name of tr4 park lamp bracket missalign]
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>