After you take out all the spark plugs you should be able to turn the fan or
put a socket on the Alternator nut to move the valves.
----- Original Message -----
From: "jim hearn" <firstname.lastname@example.org>
Sent: Friday, August 24, 2007 10:55 AM
Subject: [TR] Adjusting valves on a TR6
> To adjust the valves on my '74 TR6, I need a way to turn the engine over.
> Short of removing the radiator, I don't see a way to get to the front of
> fan to do this. Any ideas for another method of getting the motor to go
> around slow enough?
This list supported in part by the Vintage Triumph Register
Triumphs mailing list