triumphs
[Top] [All Lists]

Re: [TR] Adjusting valves on a TR6

To: pethier@comcast.net, jimmuller@rcn.com, triumphs@autox.team.net
Subject: Re: [TR] Adjusting valves on a TR6
From: MMoore8425@aol.com
Date: Sat, 25 Aug 2007 00:41:55 EDT
In a message dated 8/24/2007 9:29:50 P.M. Pacific Daylight Time,  
pethier@comcast.net writes:

From:  "Jim Muller" <jimmuller@rcn.com>
> On 25 Aug 2007 at 3:11,  pethier@comcast.net wrote (and Randall wrote 
> similarly):
> >  Backwards is easier because you can bump the car bumper with your
> >  knees while you are looking at the valves or distributor cam or
> >  whatever you are working on.
> 
> Well, as I said before, with a  Spitfire or GT6 that's not an issue!

Hmm.  The titular TR6 has a  front-hinged hood, too.  Oops.

> > Obviously the Europa was  easier forwards, because I was bumping the
> > back bumper.   :-)
> 
> I woulda' thought the Europa had overhead cams adjusted  with shims.  

The Twin Cam cars did.

> Except that it  was just a Renault engine after all, right.  Or was it 
>  adjustable OHC? 

The Renault engine in the original and Series 2 Lotus  Europa cars was a 
pushrod engine with rocker arms.  That's what I  had.  There is nothing 
sticking 
out the front of the engine.  It is  completely flat.  The cam pulley sticks 
out the back of the block, but  you are sternly warned to NEVER attempt to turn 
over the engine by turning the  cam pulley.

>Or was the JPS a real Lotus engine?  

All  of the Twin Cam, Europa Special and the rare-but-often-faked John Player 
 Special Europa cars had Ford blocks with the Lotus Twin Cam  head.

>Or are you just 
> talking about setting static  timing?

That too. 

> So many questions.

I hope I had  so many answers.

--
Phil Ethier  West Side  Saint Paul  Minnesota  USA
1962 Triumph TR4 CT2846L, 1992 Saturn SL2, 1993  Suburban,
1994 Miata C package
pethier [at] comcast [dot] net    http://forum.mnautox.com/forums/
http://www.flickr.com/photos/pethier
I  decry the textmessagization of the American-English  language.
_______________________________________________


If you have a TR3 up on jackstands and have a trouble light sitting under  
the pan, and yuu have the front wheels removed, and you bump the starter motor  
with the car in gear, it will leap off the jackstands, and will  flatten the 
trouble light so flat you can hang it on your garage wall for your  friends to 
admire.
Mike Moore 



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour
_______________________________________________

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

<Prev in Thread] Current Thread [Next in Thread>