triumphs
[Top] [All Lists]

Re: [TR] TR3 hard to slide into 1st gear

To: triumphs@autox.team.net
Subject: Re: [TR] TR3 hard to slide into 1st gear
From: "Jim Muller" <jimmuller@rcn.com>
Date: Wed, 26 Mar 2008 10:33:31 -0400
On 26 Mar 2008 at 9:54, Chip19474@aol.com wrote:

> a wise old gent told me to always shift briefly into 2nd gear
> first before shifting into 1st gear after stopping.

Of course that works by letting the 2nd gear synchro slow down the 
gearbox innards to match the stationary driveshaft.  But there is 
another possible cause.  At least on my GT6 the ultimate non-spinning 
status sometimes leaves the shafts in a position such that the dogs 
for 1st will not mesh easily.  Naturally I discover this only after a 
traffic light has turned green.  Most of the time putting it into 2nd 
does not help, nor does 3rd or 4th.  Putting it into 2nd and letting 
the clutch out a bit helps some by getting the car moving slightly.  
Mostly I'm in a panic by then as cars behind me start to lean on 
their horns and take their fingers out of their holsters.

-- 
Jim Muller
jimmuller@rcn.com
'80 Spitfire, '70 GT6+
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>