Use less catalyst.
Joe
-----Original Message-----
From: triumphs-bounces+spitlist=cox.net@autox.team.net
[mailto:triumphs-bounces+spitlist=cox.net@autox.team.net] On Behalf Of
FGFO1@aol.com
Sent: Sunday, July 06, 2008 1:24 PM
To: triumphs@autox.team.net
Subject: [TR] hot body filler
Has any one got any tips on how to slow down the cure time of body filler in
the heat of summer?
I live in the California desert and temperatures are 100+ now.
Mixing no more than you can use restricts me to an amount equal to about 2
golf balls volume.
Cleaning the mixing board, spatula and spreader take more time than the
application.
I tried putting the filler in the refrigerator over night. This slows down
the cure rate to a usable condition. however the moment one opens the can
condensation occurs and I don't think its a good idea to mix water into the
filler.
Next I tried keeping the can in the utility sink filled with water to a
level
just above the contents but below the lip of the can. After a 24 hour soak
and a rust mark at the bottom of the sink it did not do a lot to help.
IM using Rage gold filler. Evercoat says they do not product a "slow" cream
hardener.
what are you guys doing?
thanks
Frank Fisher
TR3 in Temecula California
**************Gas prices getting you down? Search AOL Autos for
fuel-efficient used cars.
(http://autos.aol.com/used?ncid=aolaut00050000000007)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as spitlist@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|