Peter,
After struggling to remove the old u-joints with hammers, sockets and a
vise........I left the installation up to a local shop. Some guys are much
better at this then me and I know my limitations, so I'll pay the pros when
necessary.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org@autox.team.net] On
Behalf Of Peter Arakelian
Sent: Thursday, July 24, 2008 11:26 PM
To: Listers
Subject: [TR] u-joint installation
I know this has been covered, but I can't find my notes. So could you folks
refresh me on installing u-joints into the half shafts of my TR6. I know it
involves sockets and vices (not the alcohol drinking vices), but any
tips/methods would be very appreciated.
Thanks in advance
Peter Arakelian - '71 TR6, Daily Driver
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as 75tr6@tr6.danielsonfamily.org
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date: 7/24/2008
5:42 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|