Interesting. When I've watched John Kipping do it he uses a small hammer.
He's not one for the BFH, and is pretty vocal to that end.
----- Original Message -----
From: "Randall" <tr3driver@ca.rr.com>
To: "'Listers'" <triumphs@autox.team.net>
Sent: Friday, July 25, 2008 1:57 PM
Subject: Re: [TR] u-joint installation
>> After struggling to remove the old u-joints with hammers, sockets and a
>> vise........
>
> I must admit, I find it easier with the hydraulic press.
>
> But I saw John Kipping do it with nothing but a BFH, and he sure made it
> look easy <G>
>
> Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|