triumphs
[Top] [All Lists]

[TR] does it need to mesh?

To: "list Triumph" <triumphs@autox.team.net>
Subject: [TR] does it need to mesh?
From: "dorpaul" <dorpaul@bellsouth.net>
Date: Mon, 28 Jul 2008 17:50:25 -0400
I'm awaiting a good reply:

I'm about to begin the process of threading the wires and control head into
the stator tube.

As stated in the Work. Manu., the stator tube was installed with the slot
uppermost and in the 12 o'clock position.  I assume that's because it
eventually seats (or meets up with) some sort of 'tab' (which is hidden from
view due to the steering wheel mounted short-tube.)  I  assume that when the
slot (at 12 o'clock) meshes with the 'tab' (also at 12 o'clock) ensuring that
a turn of the steering wheel also turns the stator tube...right?

I ask this because (if my assumption is correct), then I will need to widen
the slot a little.

Thanks, Paul Dorsey 60 tr3
p.s.  I have another time critical question that I need to
ask!!!!!!!!!!!!!!!!!!!!!!!!1

--
I am using the free version of SPAMfighter for private users.
It has removed 811 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>