triumphs
[Top] [All Lists]

Re: [TR] update to tranny bolts

To: "PACBURROWS@aol.com" <PACBURROWS@aol.com>, Triumphs@autox.team.net
Subject: Re: [TR] update to tranny bolts
From: "Greg Gelhar" <ggelhar@earthlink.net>
Date: Tue, 29 Jul 2008 19:35:19 -0500
Paul,

Yes, there are metric threads used on some places on a 1957 TR3. A typical
5/8 bolt will measure .620 inch diameter and a M16 bolt will measure .625
(allowing for some rounding of the thread form so it dose not have sharp
pointed threads). The thread pitch on a bolt with 13 threads to the inch
will be .0769 (1/13of an inch), while .0787 will be the inch equivalent of
a bolt with 2mm pitch. Very close indeed, but not equal, and M16 x  2.0 is
a common metric size.

Greg Gelhar
1973 TR6 (with the same metric threads)
1980 TR8 (all metric threads. I think)
Osseo, MN    .


> Subject: [TR] update to tranny bolts
>
> Hi again
> I wanted to clarify the measurements I have. The bolt is 5/8 in long.
Fits  a 
> 5/8 in hole. Requires a 15/16 socket to come off and has a thread count
of  
> 13.  I triple checked the thread count
> Paul
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>