The car is stock AFAIK, no mods to my knowledge or observation-- (I just
bought it, but there are lots of reasons to believe it's very original. 175
CD Strombergs. I haven't run it since buying it -- it needs a full fuel
system overhaul.
I bought carb kits for my '64 TR4 from Joe Curto, and he sent 2H needles, but
all books call for a 2A needle for TR4's. TR4A's use a 2H needle, but they've
got a different cam too. The needle specs show the 2H is roughly .009"
thinner at most stations, so this is going to be a much richer needle.
I called Joe Curto and he said he meant to send this needle, as it's the
"go-to" needle for TR4's. If that's so, why didn't the factory change the
specs ?
I know he rebuilds lots of carbs, but I hesitate to change from stock till I
have a reason to do so.
Anyone got a Stromberg-equipped TR4 ? What needle do you use ?
Thanks !
Karl
Life is like a jar of jalapenos --
What you do today might
burn your butt tomorrow !!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|