>From what recall ( and using logic) the outer edge of the slots should face
the rear. ( Passenger side, visible part of the rotor looking at the top of the
rotor \ \ \ )
The slots are there to let gas / dust escape from the pad / rotor interface.
When the rotor is spinning you want the stuff to escape the rotor rather than
being drawn into the center.
Harold
**************
Get the Moviefone Toolbar. Showtimes, theaters, movie
news &
more!(http://pr.atwola.com/promoclk/100000075x1212774565x1200812037/aol?redir=h
ttp://toolbar.aol.com/moviefone/download.html?ncid=emlcntusdown00000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|