A friend of mine had his wires on his MGB powder coated with gray and clear,
but had some chipping around the knock off and difficulty keeping the knock
offs tight. I opted to bead blast and paint / clear coat mine on my 4A - I
too had the chipping issue, but a much tighter fit on the knock offs. In
all, I think the key is to have the tires off and blast everything, then
coat as desired. Then pick a shop that has experience putting tires on
wires! I tend to stay away from powder coating where tolerances are
concerned due to increase in thickness. Just my opinion.
Brian
67 TR4A
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|