Or you can insert a bolt or screw in the cage nuts before painting and then
remove them afterwards.
Joe C.
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of Michael Moore
Sent: Thursday, April 30, 2009 9:27 PM
To: Gary Nafziger
Cc: triumphs@autox.team.net
Subject: Re: [TR] painting/cage nuts
Thats what I do.
Mike Moore
On Apr 30, 2009, at 9:08 PM, Gary Nafziger wrote:
> Just a quick question concerning painting a car with cage nuts. Is
> there a
> quick way to keep them clean? I'd thought of sticking que tips into
> each hole
> to keep them clean but that could get gummy and stick. trying to
> think of
> something cheap and easy to buy to keep the paint out.
>
> or just paint and
> use tap to clean later? any ideas would help!
>
> gary n.
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs@autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as mmoore8425@aol.com
>
> http://www.team.net/archive
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as spitlist@cox.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|