I would say use a 40104 Facet. It has a pressure rating of 1-1/2 to 3
pounds, where a 40105 has a 2-1/2 to 4-1/2.
Also the 40104 is what is recommended for TR's by Facet.
As far as a filter, the Facet fits the pump, filters to 74 microns, and
is also the recommended unit - don't go too cheap on a filter. Most
pump failures are because of small grit in them.
Peter Arakelian - '71 TR6 Daily Driver
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|