I believe the locks have one of those "C" clips holding it in place from the
rear. The window seal has a series of press on clips that you should be able
to see with the window rolled down.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces@autox.team.net
[mailto:triumphs-bounces@autox.team.net] On Behalf Of William Brewer
Sent: Thursday, August 06, 2009 10:09 AM
To: Triumphs
Subject: [TR] TR6 Door Lock and Window Seal Removal
I am stripping down my TR6 doors for painting and have a couple of
questions.
How do you get the door locks out? They look like they are just set in
there (from behind), but I can't push them out.
The window seal (the squeegee against the glass). What hold those in
and how do you get them out?
TIA,
Bill in Tehachapi
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as 75tr6@tr6.danielsonfamily.org
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|