The big, castellated plug.B Found the socket on E-Bay, and thanks to Brian
Jones for the heads up!
Terry
----- Original Message -----
From: "Mark J Bradakis" <mark@bradakis.com>
To: triumphs@autox.team.net
Sent: Wednesday, November 11, 2009 7:30:44 PM GMT -05:00 US/Canada Eastern
Subject: Re: [TR] Wrench: B TR3A OD Drain Plug
Are you talking about the small, square headed pipe plug, or the large,
flat brass plug which holds the filter in place on an A type?
I've always used a hammer and a suitable drift to remove and
install the large brass plugs, carefully applying the force to
the notches in the cap.
mjb.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs@autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
http://www.team.net/archive
|