I recently installed new seals and fuzzy door trim bought from TRF on my
TR4A. They were 2 separate pieces. If you bought a while ago you may have
the combination style and that could be the problem. Is that what you have?
JVV
----- Original Message -----
From: "G.D. Huggins" <guy at genfiniti.com>
To: <triumphs at autox.team.net>; <RedRiverTriumph at yahoogroups.com>
Sent: Tuesday, September 13, 2011 3:04 PM
Subject: [TR] TR4A - Door Seals Too Thick
> All,
>
> Years ago I bought both the inner and outer doors seals from TRF for my
> TR4A.
> With the outer door seals in place, I cannot close the door all the way.
> When I remove them, the doors close just fine.
>
> Are the TRF seals just too damned thick?
> If so, has anyone a recommendation for seals that are not too thick?
> Is there a way to thin mine out with a slice here and there?
>
>
>
> Cheers,
>
> Guy D. Huggins
> 1965 Triumph TR4A
> CTC 63569LO
|