triumphs
[Top] [All Lists]

[TR] TR4A - Door Seals Too Thick

Subject: [TR] TR4A - Door Seals Too Thick
From: 75tr6 at tr6.danielsonfamily.org (Bob Danielson)
Date: Wed, 14 Sep 2011 20:39:23 -0400
References: <mailman.2.1316023202.3414.triumphs@autox.team.net> <4F153D9E-D92F-4EDB-96A2-1E9AD8442651@mgcarclub.com>
You might want to check out Martin MacGregor 
(http://www.macgregorukcarparts.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=Triumph)
 
(or http://tinyurl.com/5s5yndw) for the various seals. His Bristleflex ones 
are excellent and he makes/carries all sorts of for doors, tops, hoods etc. 
Maybe he has what you want.


Bob Danielson
http://tr6.danielsonfamily.org
1975 TR6 with:
Throttle Body Injection
Toyota 5 Speed
Nissan Diff & CVJs




----Original Message----- 
From: Allen Hess
Sent: Wednesday, September 14, 2011 5:04 PM
To: triumphs at autox.team.net
Subject: Re: [TR] TR4A - Door Seals Too Thick

I did mine (TR4) about 11 years ago now. I ended up buying door and
trunk seals from TRF and Moss. In the end, the trunk seal from one
vendor fit and the door seal from the other fit. Each other seal was
too thick. Trimming and slicing doesn't work. Unfortunately ($) I
would recommend buying from one of the other vendors. There's also
MacGregor's in Canada but they may only do MGs.

Allen
On Sep 14, 2011, at 2:00 PM, triumphs-request at autox.team.net wrote:

> Years ago I bought both the inner and outer doors seals from TRF for
> my TR4A.
> With the outer door seals in place, I cannot close the door all the
> way.
> When I remove them, the doors close just fine.
>
> Are the TRF seals just too damned thick?
> If so, has anyone a recommendation for seals that are not too thick?
> Is there a way to thin mine out with a slice here and there?

<Prev in Thread] Current Thread [Next in Thread>