>From one wiring confusee to another:
My TR3 has a single green/black and works fine.
Now back to the harness on my TR250...........
Andrew Uprichard
-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Angelo Graham
Sent: Wednesday, September 28, 2011 9:51 AM
To: triumphs at autox.team.net
Subject: [TR] Gas tank sending unit - wiring.
Hello List:
Trouble shooting some wiring issues on the TR2 project and have a
question about the wiring associated with the tank sending unit. Pretty
simple wiring, but you know how this can work out.
My new harness has only one green/black wire for the unit and I have
installed this on the center screw connection on the sending unit.
Should there be another black ground wire from one of the mounting
screws going to a ground point somewhere on the body?
The wiring diagram I have (TR2/3) shows both a green and a green/black
wire serving the sending unit. I'm a little confused.
Thanks for any help with this.
Angelo Graham
triumphs at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/auprichard at uprichard.net
|