triumphs
[Top] [All Lists]

[TR] Gas tank sending unit - wiring.

Subject: [TR] Gas tank sending unit - wiring.
From: wbeech at flash.net (wbeech at flash.net)
Date: Wed, 28 Sep 2011 13:26:01 -0500
References: <4E83264D.70406@execulink.com>
In addition to the Green/Black to the gauge, I have a black wire going to
ground from a spade connector on the sending unit.  Maybe this was a change
with the TR3A?
Bill
Bill Beecher
'58 TR-3A TS30766L  "Tarbaby"
www.triumphowners.com/1566
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"



-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Angelo Graham
Sent: Wednesday, September 28, 2011 8:51 AM
To: triumphs at autox.team.net
Subject: [TR] Gas tank sending unit - wiring.

Hello List:
Trouble shooting some wiring issues on the TR2 project and have a question
about the wiring associated with the tank sending unit. Pretty simple
wiring, but you know how this can work out.
My new harness has only one green/black wire for the unit and I have
installed this on the center screw connection on the sending unit. 
Should there be another black ground wire from one of the mounting screws
going to a ground point somewhere on the body?
The wiring diagram I have (TR2/3) shows both a green and a green/black wire
serving the sending unit. I'm a little confused.
Thanks for any help with this.
Angelo Graham


triumphs at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net

<Prev in Thread] Current Thread [Next in Thread>