triumphs
[Top] [All Lists]

[TR] TR6 ZS won'y idle Update

Subject: [TR] TR6 ZS won'y idle Update
From: tr3driver at ca.rr.com (Randall)
Date: Mon, 19 Mar 2012 15:02:00 -0700
References: <617E3F1F677E4BE3BD3F96159D926C49@Office><003001cd051e$163d8260$0301a8c0@randall><4F668B75.2000005@charter.net> <4F66A26C.7010305@bradakis.com> <B1554CDEE1D44719AB36627A166E1FE1@Office>
> I took a look at the carbs that came out and noticed that the idle
> screws
> were down much further that I had tried.  In fact. they were down
> enough
> that the pin that the lever pushes against is totally depressed.  What
> is
> the purpose of that pin?  I don't see it in my books.

It sounds like you are describing the pin that operates the float vent valve
on later TR6.  It is supposed to be spring-loaded, so pushing on the pin
doesn't hold the throttle open.  But when the vacuum retard is disabled,
sometimes the pin bottoms out before the throttle is closed far enough.
Should be an adjustment somewhere for how far the pin gets pushed.

There are some pictures and a description in the article at
http://goo.gl/DTw1D

However, my early Stag has a different arrangement (which I think maybe was
also used on some TR6), so your car may not look exactly the same.  Although
there is an adjustment screw for the pin on my carbs, I had to bend a clip
in the linkage to get the throttle to close.

-- Randall 

<Prev in Thread] Current Thread [Next in Thread>