I just used a hose clamp and clamped it to the outer steering shaft pushed
up against the firewall. We'll see how well that works.
Dave
In a message dated 3/27/2012 6:36:58 AM Central Daylight Time,
ccsimonsen at gmail.com writes:
> Now to install the boot. The old one was a swollen hard nugget of black
> goo.
>
> Short of using lots of contact cement are there any words of wisdom?
>
> My column is in place so I slit the boot at the bottom and used black Max
> to glue it back together.
>
> On the firewall, there is only one screw near the top and no insert in
> the
> lower hole. I'm not sure if it's used for the install.
>
> Do you trim/cut the boot to slide the edge in the metal slot bracket thing
> on the firewall.
|