triumphs
[Top] [All Lists]

[TR] Tr2 or tr3 steering boot install tips anyone?

Subject: [TR] Tr2 or tr3 steering boot install tips anyone?
From: wbeech at flash.net (wbeech at flash.net)
Date: Tue, 27 Mar 2012 09:14:36 -0500
References: <2cb1c.7d6fb6b8.3ca3083d@cs.com>
Ditto with Dave, a single wire hose clamp is doing a great job 3,500 miles
later, fits well and looks neat.  I too was looking for a more engineered
fit, but never found it on any of the examples that I looked at.

Bill

Bill Beecher
'58 TR3A TS30766L "Tarbaby"
www.triumphowners.com/1566
'68 Land Rover Series IIa 88" "The Beast"
"Hello, my name is Bill and I own an old British car.  Now...What are the
next 11 steps?"
 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Dave1massey at cs.com
Sent: Tuesday, March 27, 2012 7:11 AM
To: triumphs at autox.team.net
Subject: Re: [TR] Tr2 or tr3 steering boot install tips anyone?

I just used a hose clamp and clamped it to the outer steering shaft pushed
up against the firewall.  We'll see how well that works.

Dave

In a message dated 3/27/2012 6:36:58 AM Central Daylight Time,
ccsimonsen at gmail.com writes: 
> Now to install the boot. The old one was a swollen hard nugget of 
> black goo.
> 
> Short of using lots of contact cement are there any words of wisdom?
> 
> My column is in place so I slit the boot at the bottom and used black 
> Max to glue it back together.
> 
> On the firewall, there is only one screw  near the top and no insert 
> in the lower hole. I'm not sure if it's used for the install.
> 
> Do you trim/cut the boot to slide the edge in the metal slot bracket 
> thing on the firewall.

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/wbeech at flash.net

<Prev in Thread] Current Thread [Next in Thread>